How to Classify a CBSA Revision Before Changing Your Import Process

Not every CBSA D-Memorandum revision creates a new customs liability. This guide separates terminology updates, administrative changes and operative import requirements, with examples involving CARM, aluminum-origin data, U.K. tariff treatment and U.S.-origin surtaxes.

CBSA UpdatesNovember 14, 20266 min readBy LogisticNorth Editorial Team

LogisticNorth

Moving goods across the border? Our licensed brokers can help.

Get fast, compliant customs clearance and expert HS classification advice.

Illustration for: How to Classify a CBSA Revision Before Changing Your Import Process

A revised CBSA D-Memorandum or Customs Notice does not automatically mean that an importer has a new duty, data field or border procedure to implement. The first control question is more precise: does the update change the law or tariff treatment, change the data required to account for goods, or simply bring CBSA guidance into line with an existing process?

That distinction matters for importers in Brampton, Toronto and Mississauga. A terminology update may belong in the customs procedures manual, while an origin-data requirement may require supplier outreach, broker instructions and system changes. Treating both as the same type of change creates either unnecessary work or a missed compliance action.

Three types of CBSA revision

1. Guidance and terminology updates

Memorandum D11-6-8 was revised on September 9, 2026, to reflect CARM Release 3 terminology and processes. References to the former B3-3 and B2 forms were replaced with the Commercial Accounting Declaration, or CAD, framework. The underlying replacement of those forms had already taken effect on October 21, 2024, so the 2026 revision is a documentation and guidance update rather than a newly created 2026 customs liability. CBSA Memorandum D11-6-8

For a commercial importer, the appropriate response is generally to update internal terminology, templates and training materials. Verification files and correction procedures that still describe B2 or B3 processes may no longer accurately describe the CARM workflow. That does not, by itself, mean that every historical entry needs to be refiled.

2. Administrative responsibility or system-label changes

Memorandum D19-6-3 was revised on October 15, 2026, following the transfer of responsibility for the Energy Efficiency Regulations from Natural Resources Canada to Environment and Climate Change Canada. The memorandum also replaced the term “Single Window Initiative” with “Customs Single Window.” The related administrative transfer occurred on July 30, 2026; the CBSA memorandum page does not identify a separate new import obligation beginning on October 15. CBSA Memorandum D19-6-3

This type of revision generally calls for an ownership and reference check. An importer of regulated energy-using products may want to confirm that its compliance matrix identifies the correct department and that Integrated Import Declaration procedures use the current terminology. The revision should not be treated as evidence of a new product requirement unless the applicable regulation or CBSA notice creates one.

3. Operative tariff, data or accounting changes

Other updates require an entry-level control. They can change the tariff treatment claimed, the information supplied with an import declaration or the amount accounted for. These should be separated from editorial or administrative revisions.

Examples that require an operational response

Covered aluminum products: origin data is an input to the declaration

For covered aluminum products under item 83 of the Import Control List, the requirements described in Memorandum D19-10-2 and Customs Notice 26-15 took effect October 1, 2026. Importers and brokers handling covered goods would generally need to provide the country of largest smelt, the country of second-largest smelt where applicable, and the country of most recent cast. The information is submitted through the applicable Integrated Import Declaration or Customs Single Window process, and the CAD cites special authority reference GIP83-OIC19-1224. CBSA Memorandum D19-10-2 Customs Notice 26-15

The stated exceptions include CSA importers using the CSA service option and situations covered by the applicable low-value exception. An Ontario manufacturer or distributor using aluminum inputs should therefore discuss product scope, supplier evidence and the declaration path with its broker before assuming that a general certificate of origin is sufficient.

U.K. goods: tariff treatment depends on eligibility

Eligible goods from the United Kingdom, the Channel Islands and the Isle of Man became eligible for Comprehensive and Progressive United Kingdom Tariff treatment on September 1, 2026. The corresponding tariff treatment code is 35. CBSA published the updated T2026-2 tariff in all formats on September 16, but the preferential treatment applies from September 1. Customs Notice 26-22

This is not merely a manual wording change. An importer whose goods qualify would generally need to ensure that the origin analysis, supporting records and tariff treatment instruction are aligned. A Toronto or Mississauga importer receiving U.K.-origin goods through a Canadian distribution operation should distinguish the goods’ origin from the location of the warehouse or final delivery.

U.S.-origin goods: surtax treatment belongs in the accounting control

Certain U.S.-origin goods became subject to surtaxes of 15%, 25% or 50% effective September 8, 2026. The measure can apply to commercial and casual imports and can apply where goods are exported to Canada through a third country. For listed goods, the applicable surtax is declared in the CAD through CARM, EDI or API using surtax codes 26186A, 26186B or 26186C. Customs Notice 26-23

The response is generally a product-and-origin review, not a wholesale update to every customs procedure. Importers should identify affected tariff items, confirm the relevant origin facts and give the broker clear instructions for the CAD. Where remission may apply, Customs Notice 25-19 describes expanded product- and company-specific relief, including Schedule 4.2 for qualifying goods imported on or after September 8 and Schedule 7 for certain goods not covered by horizontal remission. The updated notice reflects amendments effective November 9, 2026, and eligible importers would generally need to claim relief using the applicable special authorization code in the CAD. Customs Notice 25-19

A practical change-control test

Before assigning a revised memorandum to IT, purchasing or the broker, classify it using four questions:

  1. Does the revision identify a new effective date? Record the date separately from the date the notice or memorandum was published.
  2. Does it change the accounting result? Look for a new tariff treatment, surtax, remission mechanism or special authority reference.
  3. Does it add a declaration field? Origin data such as smelt and cast information may require supplier documentation before the shipment is released.
  4. Does it only replace terminology or identify an administrative owner? If so, update manuals, forms and responsibility matrices without assuming that a new import charge exists.

For each operative change, the broker discussion should cover the tariff item, country of origin, applicable effective date, declaration channel, supporting records and any exception or relief mechanism. For each guidance-only revision, the discussion should instead confirm whether internal documents and staff instructions use the current process language.

What GTA importers should put on the review agenda

  • Manufacturers: review aluminum supply-chain records and determine whether suppliers can provide the required smelt and cast information for covered products.
  • Distributors and retailers: separate U.S.-origin exposure from the country through which goods were shipped, and verify whether listed goods require a surtax treatment in the CAD.
  • Importers of U.K. goods: confirm eligibility for tariff treatment code 35 and retain the origin support used for the claim.
  • All commercial importers: update references to B2 and B3 in customs manuals where the current process is the CAD and CARM framework, while avoiding unnecessary rework of entries solely because the memorandum wording changed.

The useful control is not a blanket rule to implement every revision. It is a documented decision showing whether the update changes liability, declaration data, tariff treatment or only the description of an existing process. That decision gives the importer and broker a clearer basis for deciding what belongs in the next shipment instruction, supplier request, system ticket or procedure-manual update.

LogisticNorth

Moving goods across the border? Our licensed brokers can help.

Get fast, compliant customs clearance and expert HS classification advice.

Frequently asked questions

Does every revised CBSA D-Memorandum create a new customs obligation?+

No. Some revisions update terminology or administrative responsibility without identifying a separate new import obligation. Other notices and memoranda change tariff treatment, declaration data or accounting requirements and generally require an operational response.

What changed in D11-6-8 in 2026?+

The memorandum was revised on September 9, 2026, to reflect CARM Release 3 terminology and processes, replacing references to B3-3 and B2 with the Commercial Accounting Declaration framework. The revision was described as a guidance and documentation update rather than a new 2026 customs liability.

What aluminum information may be required for covered goods?+

For covered aluminum products under item 83 of the Import Control List, the importer or broker would generally provide the country of largest smelt, the country of second-largest smelt where applicable, and the country of most recent cast, subject to the stated exceptions and applicable low-value rules.

How should an importer review a CBSA revision?+

The importer should identify the effective date, determine whether the update changes the accounting result or declaration data, check for exceptions or remission, and then decide whether the action belongs with the broker, supplier, systems team or procedure owner.

This article was reviewed by our licensed customs team before publication. It is general information, not customs or legal advice — regulations change, and your circumstances may differ. Talk to a broker before acting on it.

#cbsa updates#d-memorandum#customs notices#carm#commercial accounting declaration#aluminum imports#u.s. surtax#uk tariff treatment#customs compliance#import documentation